Consolidation Apparatus – Digital
The standard consolidation apparatus is supplied with a weight set to achieve a total pressure of 10kg/cm2 (in addition to the seating load of 0.05kg/cm2 on the specimen), but an additional set of weights is required to reach the full capacity of 20kg/cm2.
The consolidation is measured by conventional dial gages or digital gages and common configurations include a single and three-gang consolidometers, with a six-gang version available on special request.
Key Features
♦ Digital readout reduces the possibility of operator error
♦ Direct reading in mm
♦ Plug-in transducer module system
♦ Facility for connecting readout unit to compatible logging or printing system
♦ High capacity – 8800kPa on 50mm diameter specimens using 11:1 beam ratio
♦ Triple beam ratio, 9:1, 10:1, 11:1
♦ Compact unit ensures maximum space saving
♦ Applicable standards: BS 1377; EN 1997-2; ASTM D2435, D4546; AASHTO T216
Standard and Optional Accessories
Supplied as standard:
♦ TO-12501 Consolidation Unit
♦ TO-12502 Cell assembly complete with all accessories suitable for 60mm diameter x 20mm thick specimens
♦ TO-12503 Set of 29 weights to generate 10kg/cm2 stress on 60mm diameter specimen
♦ TO-12504 Water reservoir with tube,
♦ T connection and pinch cock
Optional accessories:
♦ TO-12502 Cell assembly complete with all accessories suitable for 60mm diameter x 20mm thick specimens
♦ TO-12503 Set of 29 weights to generate 10kg/cm2 stress on 60mm diameter specimen
♦ TO-12504 Water reservoir with tube, T connection and pinch cock
♦ TO-070 Dial gage, 5mm x 0.002mm
♦ TO-12801 Digital displacement sensor, 0-10mm
♦ TO-12802 Digital indicator for single channel
♦ TO-13001 Digital indicator for three channels
|
|
|
|
---------------------------------------------------------------------
