Tinius Olsen
HW10 Wedge Grips



Slide1
Slide2
Slide3



Self-tightening wedge grips with spring-loaded wedges to provide the initial gripping and allow rapid loading of the sample. Gripping wedges are supplied with serrated jaw faces for gripping flat samples. Optional V profile wedges are available for gripping round sections up to 15mm (6/10in).
The wedge style tensile grip is used on ST series materials testing machines.
Specifications
V profile jaw face options
Applications
Recommended for gripping relatively soft materials in parallel or dumbbell form. Typical materials include copper, sstrongi-rigid plastics, film, board, wood etc. Ideally the overall sample length should be greater than 150mm/6in.
- Download Brochure
Please Fill the Fields to download pdf
- Mail us
Request a quote
Similar Accessories
Short Beam 3-point Flexural Fixture
HT58 Lightweight Pneumatic Grips
HT53 Miniature Knurled Roller Grips
Compression Anti-Buckling Fixture
Shear Loading Compression Fixture
Combined Loading Compression Fixture
V-notched Shear Compression Fixture
HF74 3-Point Wide Variable Flexural
Compression Cage for Environmental Chamber
Flex cage for Environmental Chamber
330-012 3-Point Flex Test with LVDT
Double Shear Bearing Strength Test - Procedure A
Single Shear Open Hole Bearing Test - Procedure B
Single Shear Bearing Strength Test - Procedure C