Tinius Olsen

HT32 Double Bollard Grip

Slide1
Slide2
Slide3
previous arrow
next arrow
Slide1
Slide2
Slide3
previous arrow
next arrow
When using the double bollard grip, a vice clamp holds the free end of the specimen, which is then wrapped around two bollards in a figure of eight configuration. Friction on the bollards reduces the stress at the clamp point, preventing premature failure of the specimen.

 

The HT32 Double Bollard Grip is used on benchtop materials testing machines.

 

Specifications

  • Item# : 99-032-0000
  • Maximum capacity: 20kN/4,000lbf
  • Minimum loadcell: 50N/10lbf
  • Maximum specimen diameter: 6mm/0.23in
  • Length each: 135mm/5.3in
  • Weight each: 850g/1.87lb
  • Temperature limits: -30-70°C

    •  

    Applications

  • Light rope
  • Ductile wire
  • Cord

    • Similar Accessories

    Self-Centering Platen

    Ball Seating Platen

    121-013 Elastic Filament Grip

    S630 Fixed Span Flex Test

    Short Beam 3-point Flexural Fixture

    90° Peel Fixture

    CTM Stand

    Touchscreen-Based EDI

    180° Peel Fixture

    Climbing Drum Peel Unit

    Coefficient of Friction Test

    Flexural Frame

    Lateral Extensometer

    Longitudinal Compressometer

    Platen Handling

    Horizon Software

    HMC2.0

    Proterm

    HT33 Single Bollard Grip

    HT34 Soft Wire Grip

    HT29 Split Bollard Grip

    HT43 Seat Belt Grip

    HT19 Split Collet

    HT23 Tension Hooks

    HT24 Dumbbell Grips

    HT25 Briquette Grip

    HT31 Dumbbell Grips

    HT20 Electrical Cable Crimp

    121-003 Vise Grips

    121-014 Vise Grips

    HT54 Miniature Vise Grips

    HT51 Side Loading Vise Grips

    HT42 Pneumatic Grips

    HT45 Pneumatic Grips

    HT44 Pneumatic Grips

    HT57 Horn Type Bollard Grip

    HT58 Lightweight Pneumatic Grips

    Air Distribution Controller

    131-007 Bollard Grips

    137-004 Bollard Grips

    187-005 Knurled Roller Grips

    187-006 Knurled Roller Grips

    HT38 Double Roller

    HT53 Miniature Knurled Roller Grips

    157-004 Scissor Grips

    157-005 Scissor Grips

    HW10 Wedge Grips

    HW14 Wedge Grips

    HB15 Bollard Grips

    HW20 Wedge Grips

    HW21 Wedge Grips

    120kN Hydraulic Tensile Grip

    300kN Hydraulic Tensile Grip

    Grip 67-N-20

    Grip 67-N-22

    Grip 67-N-23

    Grip 67-N-24 K-Grip

    Grip 67-N-83 R-Grip

    Grip 67-N-25 KR-Grip

    Grip 67-N-38

    Grip 67-N-39

    Grip 67-N-42

    Grip 67-N-91

    Grip 67-N-93

    Grip 67-N-27

    270-015 Compression Platen

    270-016 Compression Platen

    270-017 Compression Platen

    270-018 Compression Platen

    270-019 Compression Platen

    270-020 Compression Platen

    270-014 Compression Platen

    Compression Anti-Buckling Fixture

    Shear Loading Compression Fixture

    Combined Loading Compression Fixture

    V-notched Shear Compression Fixture

    336-001 4-Point Flex Test

    336-002 3-Point Flex Test

    HF74 3-Point Wide Variable Flexural

    Compression Cage for Environmental Chamber

    Flex cage for Environmental Chamber

    330-012 3-Point Flex Test

    330-012 3-Point Flex Test with LVDT

    V-notched Rail Shear Test

    Double Shear Bearing Strength Test - Procedure A

    Single Shear Open Hole Bearing Test - Procedure B

    Single Shear Bearing Strength Test - Procedure C

    Automated System Cell

    Automated System Monitoring

    Specimen Identification Station

    Specimen Measurement Station

    Specimen Storage Station