Tinius Olsen

HB15 Bollard Grips

Slide1
Slide2
previous arrow
next arrow
Slide1
Slide2
previous arrow
next arrow
Self-tightening bollard wedge grips. The combination of a wedge and bollard provides an efficient method of gripping low friction materials. A lever release allows rapid loading of the test sample.

 

The wedge style tensile grip is used on ST series materials testing machines.

 

Specifications

  • Maximum capacity: 10kN/2,000lbf
  • Minimum loadcell: 500N/100lbf
  • Maximum sample width: 25mm/1in
  • Maximum sample thickness: 3mm/0.1in
  • Length each: 130mm/5.1in
  • Weight each: 2.2kg/4.5lbf
  • Temperature limits: -70-200°C
  •  

    Applications

    Flexible low friction materials such as polypropylene strapping, PTFE tape, roofing felts etc. Ideally the overall sample length should be greater than 350mm (14in).

    • Download Brochure
    • Mail us

    Similar Accessories

    Lateral Extensometer

    HT20 Electrical Cable Crimp

    HT53 Miniature Knurled Roller Grips

    Grip 67-N-38

    V-notched Shear Compression Fixture

    Specimen Storage Station

    Longitudinal Compressometer

    121-003 Vise Grips

    157-004 Scissor Grips

    Grip 67-N-39

    336-001 4-Point Flex Test

    122-008 Pneumatic grip - 20kN

    Platen Handling

    121-014 Vise Grips

    157-005 Scissor Grips

    Grip 67-N-42

    336-002 3-Point Flex Test

    Horizon Software

    HT54 Miniature Vise Grips

    HW10 Wedge Grips

    Grip 67-N-91

    HF74 3-Point Wide Variable Flexural

    Self-Centering Platen

    HMC 3.0

    HT51 Side Loading Vise Grips

    HW14 Wedge Grips

    Grip 67-N-93

    Compression Cage for Environmental Chamber

    Ball Seating Platen

    Proterm

    HT42 Pneumatic Grips

    Grip 67-N-27

    Flex cage for Environmental Chamber

    121-013 Elastic Filament Grip

    HT33 Single Bollard Grip

    HT45 Pneumatic Grips

    HW20 Wedge Grips

    270-015 Compression Platen

    330-012 3-Point Flex Test

    S630 Fixed Span Flex Test

    HT34 Soft Wire Grip

    HT44 Pneumatic Grips

    HW21 Wedge Grips

    270-016 Compression Platen

    330-012 3-Point Flex Test with LVDT

    Short Beam 3-point Flexural Fixture

    HT29 Split Bollard Grip

    HT57 Horn Type Bollard Grip

    120kN Hydraulic Tensile Grip

    270-017 Compression Platen

    V-notched Rail Shear Test

    90° Peel Fixture

    HT43 Seat Belt Grip

    HT58 Lightweight Pneumatic Grips

    300kN Hydraulic Tensile Grip

    270-018 Compression Platen

    Double Shear Bearing Strength Test - Procedure A

    CTM Stand

    HT32 Double Bollard Grip

    Air Distribution Controller

    Grip 67-N-20

    270-019 Compression Platen

    Single Shear Open Hole Bearing Test - Procedure B

    Touchscreen-Based EDI

    HT19 Split Collet

    131-007 Bollard Grips

    Grip 67-N-22

    270-020 Compression Platen

    Single Shear Bearing Strength Test - Procedure C

    180° Peel Fixture

    HT23 Tension Hooks

    137-004 Bollard Grips

    Grip 67-N-23

    270-014 Compression Platen

    Automated System Cell

    Climbing Drum Peel Unit

    HT24 Dumbbell Grips

    187-005 Knurled Roller Grips

    Grip 67-N-24 K-Grip

    Compression Anti-Buckling Fixture

    Automated System Monitoring

    Coefficient of Friction Test

    HT25 Briquette Grip

    187-006 Knurled Roller Grips

    Grip 67-N-83 R-Grip

    Shear Loading Compression Fixture

    Specimen Identification Station

    Flexural Frame

    HT31 Dumbbell Grips

    HT38 Double Roller

    Grip 67-N-25 KR-Grip

    Combined Loading Compression Fixture

    Specimen Measurement Station