Lightweight low gripping pressure pneumatic vise grips. Ideally suited for use with low force capacity loadcells. Unique line contact jaw solution delivers maximum gripping pressure while minimizing premature grip breaks.
The pneumatic tensile grip is used on ST series materials testing machines.
Maximum capacity: 100N/22.4lbf
Minimum loadcell: 5N/1lbf
Maximum sample width: Typical fibers
Length each: 100mm/4in
Weight each: 19g/0.04lb
Temperature limits: Ambient
Operating air supply: 80-100psi/5.5-7bar
Refer to Tinius Olsen for configuration
Ideally the sample should be longer than 175mm/7in