Tinius Olsen
HT25 Briquette Grip
Cement briquette non-clamping chuck with an internal profile conforming to the British Standard for the cast cement test.
This low force tensile grip is used on ST series materials testing machines.
Specifications
- Item# : 99-025-0000
- Maximum capacity: 25kN/5,000lbf
- Minimum loadcell: 100N/20lbf
- Maximum specimen width: See Note*
- Maximum specimen thickness: See Note*
- Length each: 90mm/3.5in
- Weight each: 1kg/2.2lb
- Temperature limits: -30-70°C
Note: Specimen conforms to BS6319 Part B
Applications
- Cast cement briquettes
- Resin bonded sand briquettes
Similar Accessories
Combined Loading Compression Fixture
HT53 Miniature Knurled Roller Grips
V-notched Shear Compression Fixture
HF74 3-Point Wide Variable Flexural
Compression Cage for Environmental Chamber
Flex cage for Environmental Chamber
330-012 3-Point Flex Test with LVDT
Short Beam 3-point Flexural Fixture
HT58 Lightweight Pneumatic Grips
Double Shear Bearing Strength Test - Procedure A
Single Shear Open Hole Bearing Test - Procedure B
Single Shear Bearing Strength Test - Procedure C
Compression Anti-Buckling Fixture
