Tinius Olsen

HT33 Single Bollard Grip

Slide1
Slide2
Slide3
Slide4
previous arrow
next arrow
Slide1
Slide2
Slide3
Slide4
previous arrow
next arrow
The HT33 is designed for holding a single bollard grip. The free end of the test specimen is held in a vice clamp. The specimen is then wrapped around a single friction bollard; this friction bollard reduces the concentration of stress at the clamping point and prevents premature breakage of the specimen.

 

The dumbbell grip is used on ST series materials testing machines.

 

Specifications

  • Item #: 99-033-0000
  • Maximum capacity: 2kN/400lbf
  • Minimum loadcell: 50N/10lbf
  • Maximum specimen diameter: 5mm/0.2in
  • Length each: 70mm/2.75in
  • Weight each: 350g/0.77lb
  • Temperature lLimits: -30-70°C

    •  

    Applications

  • Yarn
  • Threads
  • Wool
  • Cables
  • Fishing line
    • Download Brochure
    • Request a Quote

    Similar Accessories

    Climbing Drum Peel Unit

    HT24 Dumbbell Grips

    187-005 Knurled Roller Grips

    Grip 67-N-24 K-Grip

    Compression Anti-Buckling Fixture

    Automated System Monitoring

    Coefficient of Friction Test

    HT25 Briquette Grip

    187-006 Knurled Roller Grips

    Grip 67-N-83 R-Grip

    Shear Loading Compression Fixture

    Specimen Identification Station

    Flexural Frame

    HT31 Dumbbell Grips

    HT38 Double Roller

    Grip 67-N-25 KR-Grip

    Combined Loading Compression Fixture

    Specimen Measurement Station

    Lateral Extensometer

    HT20 Electrical Cable Crimp

    HT53 Miniature Knurled Roller Grips

    Grip 67-N-38

    V-notched Shear Compression Fixture

    Specimen Storage Station

    Longitudinal Compressometer

    121-003 Vise Grips

    157-004 Scissor Grips

    Grip 67-N-39

    336-001 4-Point Flex Test

    122-008 Pneumatic grip - 20kN

    Platen Handling

    121-014 Vise Grips

    157-005 Scissor Grips

    Grip 67-N-42

    336-002 3-Point Flex Test

    Self-Centering Platen

    Horizon Software

    HT54 Miniature Vise Grips

    HW10 Wedge Grips

    Grip 67-N-91

    HF74 3-Point Wide Variable Flexural

    Ball Seating Platen

    HMC 3.0

    HT51 Side Loading Vise Grips

    HW14 Wedge Grips

    Grip 67-N-93

    Compression Cage for Environmental Chamber

    122-007 Side operating Pneumatic Grip, 5kN

    Proterm

    HT42 Pneumatic Grips

    HB15 Bollard Grips

    Grip 67-N-27

    Flex cage for Environmental Chamber

    121-013 Elastic Filament Grip

    HT45 Pneumatic Grips

    HW20 Wedge Grips

    270-015 Compression Platen

    330-012 3-Point Flex Test

    S630 Fixed Span Flex Test

    HT34 Soft Wire Grip

    HT44 Pneumatic Grips

    HW21 Wedge Grips

    270-016 Compression Platen

    330-012 3-Point Flex Test with LVDT

    Short Beam 3-point Flexural Fixture

    HT29 Split Bollard Grip

    HT57 Horn Type Bollard Grip

    120kN Hydraulic Tensile Grip

    270-017 Compression Platen

    V-notched Rail Shear Test

    90° Peel Unit, 1.5kN

    HT43 Seat Belt Grip

    HT58 Lightweight Pneumatic Grips

    300kN Hydraulic Tensile Grip

    270-018 Compression Platen

    Double Shear Bearing Strength Test - Procedure A

    CTM Stand

    HT32 Double Bollard Grip

    Air Distribution Controller

    Grip 67-N-20

    270-019 Compression Platen

    Single Shear Open Hole Bearing Test - Procedure B

    Touchscreen-Based EDI

    HT19 Split Collet

    131-007 Bollard Grips

    Grip 67-N-22

    270-020 Compression Platen

    Single Shear Bearing Strength Test - Procedure C

    180° Peel Fixture

    HT23 Tension Hooks

    137-004 Bollard Grips

    Grip 67-N-23

    270-014 Compression Platen

    Automated System Cell