Tinius Olsen
HT20 Electrical Cable Crimp
The HT20 Cable Crimp connector attachment is used to hold a cable with a crimped connector attached. The inner circular part rotates enabling the user to select the optimum size “slot” through which the cable can pass, resting the lower crimp body on the inner side of the circular part as pictured. Typically the other end of the cable has no crimp and is held in a wedge or roller or scissors grip depending on cable gage/size and strength, enabling a tensile pull test to be applied. The HT20 has eight (8) slots to accommodate various gage wire sizes.
This low force tensile grip is used on ST series materials testing machines.
Specifications
Applications
Similar Accessories
122-007 Side operating Pneumatic Grip, 5kN
Flex cage for Environmental Chamber
330-012 3-Point Flex Test with LVDT
Short Beam 3-point Flexural Fixture
HT58 Lightweight Pneumatic Grips
Double Shear Bearing Strength Test - Procedure A
Single Shear Open Hole Bearing Test - Procedure B
Single Shear Bearing Strength Test - Procedure C
Compression Anti-Buckling Fixture
Shear Loading Compression Fixture
Specimen Identification Station
Combined Loading Compression Fixture
HT53 Miniature Knurled Roller Grips
V-notched Shear Compression Fixture
