Contact us

Contact Information







*


Handheld wireless user interface

HMC

Wireless handheld interface that is connected to the machine by a Bluetooth link.

This interface can be used on both the ST and SL series of testers. It features an Android-based operating platform and can be used to control the machine by itself or in conjunction with Tinius Olsen’s Horizon software.


tinius olsen hmc handheld wireless user interface

Features & Benefits

♦ Bluetooth-enabled handheld interface allows maximum flexibility when paired to a testing machine.

♦ Battery-operated with hot-swappable batteries. Typical battery life is approximately 10 hours of continuous use.

♦ Three-channel display of test machine channels.

♦ Selectable multi-unit display of channel values.

♦ Safe operating radius of a maximum 10m. If range is exceeded for testing, the machine will operate in ‘safe’ mode.

♦ Controls machine movement during test setup and initiates a test directly from the built-in control pad.

♦ Instantaneous display of machine status and channel values.

♦ Test procedure involving up to five steps can be set up and run directly on the HMC interface. These steps include move, hold and cycle routines.

♦ Interface has a military vibration rating and will resist shock if dropped.

♦ Interface is WiFi enabled and can be part of a local network.

♦ Test results can be printed on a Bluetooth-paired printer, to a network printer or to a memory device via an included micro USB connection.

♦ 8MP camera is built into the interface and can be used to take pictures of specimens, tests and configurations as witness to each test.

♦ Interface is bar code reader enabled.

♦ Interface has 1080p video at 30fps capability to record test procedure.

♦ Stylus is included with the interface.

tinius olsen hmc handheld wireless user interface

Specifications

♦ Compatible with: ST & SL series frames

♦ Touch screen: Multi-touch capacitive, rain-resistant & inductive stylus

♦ Dedicated hard keys: Cross-head positioning

♦ Technology platform: Android v4.1.1 (Jelly Bean)

♦ Display: 141mm diagonal super AMOLED 720 * 1280 pixels

♦ IP rating: Sealed to IP67 (submersible)

♦ Shock vibration rating: MIL-STD 810G Method 516.6 & Method 514.6

♦ Size: LxWxD – 232 x 99 x 29mm/ 9.1 x 3.9 x 1.14in

♦ Weight: 442g/15.6oz

♦ Sound: Vibration, MP3, WAV files, Loudspeaker voice; 70db/Noise 66db/Alerts 80db

♦ Graphics: Mall-400MP

♦ Sensors: Accelerometer, gyro, proximity, compass, barometer

♦ WLAN: WiFi 802.11 a/b/g/n, dual band, DLNA, WiFi direct, WiFi hotspot

♦ Bluetooth: v4.0 with A2DP, LE, EDR

♦ USB: microUSB v2.0 (MHL), USB Host

♦ Camera: Primary 8MP, 3264 * 2448 pixels, autofocus, LED flash, simultaneous video and image recording, geo tagging, touch focus, work piece/target detection, image stabilisation

♦ Video: 1080p@30fps

♦ GPS: A-GPS support + GLONASS

♦ Mag Strip reader: 3 channel, bi-directional card reader. Security: DES, Triple DES, AES encryption. Management: DUKPT key manager

♦ Operating temperature: 10 to 40°C

♦ Operating humidity: 10% to 90% non-condensing

♦ Storage temperature: 5 to 45°C

♦ Storage humidity: 10% to 70% non-condensing

tinius olsen hmc handheld wireless user interface