Ideally suited for use with low force capacity loadcells. Unique line contact jaw solution delivers maximum gripping pressure while minimizing premature grip breaks.
The pneumatic tensile grip is used on ST series materials testing machines.
♦ Maximum Capacity: 100N/22.4lbf
♦ Minimum Loadcell: 5N/1lbf
♦ Maximum Sample Width: Typical Fibers
♦ Length Each: 100mm/4in
♦ Weight Each: 19g/0.04lb
♦ Temperature Limits: Ambient
♦ Operating Air Supply: 80 to 100psi / 5.5 to 7bar
Refer to Tinius Olsen for configuration
Ideally the sample should be longer than 175mm (7in)