DG Series Compression
The large lower bearing block includes a bellows, so preventing leaks caused by dust and debris getting into the loading piston. The other advantage of this large bearing block is that it allows for a wide horizontal entrance opening and plenty of ready access for loading and removing specimens. Additionally these machines offer an optional chute for quick removal of completed specimens and rapid cleaning of the test area.
The digital display has a straightforward design using a mem-brane keypad and an LCD display to let operators select the test parameters simply and efficiently. A pace bar graph on the display allows operators to finely tune the loading during the test, and as a further convenience, the display stores up to 2,000 tests.
While these machines are ideally positioned to test cubes and cylinders, you can take your testing to another level by adding a flexure testing attachment that will work with the pumping unit in the TO-317E-DG frame. A simple manual valve system needs to be installed and you are ready to test the flexural strength of concrete beams, up to 100kN (22,000 lbf) maximum load.
This series also includes the rapid change platen system with which operators can quickly and easily change accessories, quickly switching between cylinder, block, cube and beam specimen testing.
Key Features & Benefits
|♦||Meets or exceeds key ASTM, EN, AASHTO standards|
|♦||Manual pace rate control|
|♦||Automatic stress determination and display|
|♦||Interlocked safety doors with mesh window as standard|
|♦||Overload safety protection|
|♦||Self aligning platens|
|♦||Automatic data logging|
|♦||Peak load capture and recording|