Contact us

Contact Information








Model TO-340-A

Air Entrainment Meter – Type A

Entrainment of a small amount of air in the cement concrete has been found to considerably improve the durability of concrete. The recommended limits specified for the air content are between 3% and 6.5%. Smaller percentages may result in deterioration taking place more quickly and larger percentages may reduce the strength without any improvement in the durability of concrete.

Further, when use of admixtures is made to increase workability of concrete, a check of the air content is required to ensure that the percentage of air remains between 1% and 2% for optimum performance of the concrete structure.

An Air Entrainment Meter, as specified in ASTM standards, is used to determine these percentages.


tinius olsen air entrainment meter type A

The meter consists of a pressure-tight flanged cylindrical measuring bowl, fitted with a removable flanged and conical cover assembly with a seal in between. The conical cover has an air valve and a pet cock for bleeding off the water. A cylindrical stand pipe, which is graduated in percent of air content, is fixed on the conical cover assembly.

Required pressure is applied to the specimen with the help of a pressure bulb. The whole assembly is mounted on a flat base. Each apparatus is supplied complete with a calibrating cylinder, pressure gauge, funnel, trowel and tamping bar.

Applicable Standards: EN 12350-7; ASTM C 231.

tinius olsen air entrainment meter type A

Information

Supplied as standard with:

♦ Calibration Kit

♦ Rubber Mallet

♦ Tamping Rod

♦ Gauging Trowel

♦ Measuring Cylinder

♦ Straight Edge

Optional accessories

-- Calibration Kit

-- Rubber Mallet

TO-345 Tamping Rod

TO-428 Gauging Trowel

-- Measuring Cylinder

-- Straight Edge

-- Syringe

Ordering Information

TO-340-A Air Entrainment Meter Type A

TO-341-A Air Entrainment 10lts Type A

TO-342-A Air Entrainment 100lts Type A

tinius olsen air entrainment meter type A