联系我们

联系信息








GRPN00EN01

Grip 99-058-0000

Heavy duty vice grip. Considerable gripping pressure can be exerted on the sample via a large handwheel. It is supplied with three sets of interchangeable jaw faces: crosshatch, flat alloy and corrugated.

The depth of corrugation is graduated to reduce the amount of gripping stress at the front edge of the jaw face. Additional jaw faces are available including rubber faced or grab test jaws. For grab test, specify back fixed jaw as either 50 or 75mm wide and the front moving jaw 25 x 25mm.

The pneumatic tensile grip is used on ST series materials testing machines.


tinius olsen pneumatic tensile grip 99-058-0000

Specifications

♦ Maximum Capacity: 20kN/4,000lbf

♦ Minimum Loadcell: 500N/100lbf

♦ Maximum Sample Width: 100mm/4in

♦ Maximum Sample Thickness: 10mm/0.4in

♦ Gripping Length: 50mm/2in

♦ Length Each: 150mm/6in

♦ Weight Each: 2.8kg/6lb

♦ Temperature Limits: -70 to 200°C

tinius olsen pneumatic tensile grip 99-058-0000

Applications

♦ Flexible sheet materials

♦ Woven or non-woven textiles

♦ Plastic film

♦ Cork

Ideally the sample should be longer than 175mm (7in)

tinius olsen pneumatic tensile grip 99-058-0000