联系我们

联系信息








GRLT00EN01

Grip 99-019-0000

Hardened split collet chucks for holding turned dumbbell test pieces. Precise shoulder radius to prevent premature test piece breaking within the grip. Internal profile options must be considered and ordered to accommodate specific test specimen dimensions.

This low force tensile grip is used on ST series materials testing machines.


tinius olsen low force tensile grip 99-019-0000

Specifications

♦ Maximum Capacity: 20kN/4,000lbf

♦ Minimum Loadcell: 50N/10lbf

♦ Specimen Profile: Type A-B for 5mm diameter

♦ Specimen Profile: Type C-D for 7mm diameter

♦ Specimen Profile:  Type E-F for 10mm diameter

♦ Length Each: 40mm/1.6in

♦ Weight Each: 150g/0.33lb

♦ Temperature Limits: -30 to 70°C

tinius olsen low force tensile grip 99-019-0000

Applications

♦ Metals, round and turned test specimens, particularly used where only a limited amount of material is available to produce the test specimen – for example from an alloy automobile wheel

♦ Widely used in education to demonstrate materials performance and behaviour

tinius olsen low force tensile grip 99-019-0000