Mechanical Instrumentation & Accessories

Double-Acting Center Punch

This center punch is recommended when it is necessary to make two sets of marks in the same planes on opposite sides of a specimen. In use, the specimen is placed under the spring clamp, and the two removable punches hit with a hammer. Standard gage length is 2 in. for a 0.505 in. diameter specimen. Other diameters and settings can be furnished.

P/N: 01011017 - 2 inch gage length
P/N: N/A - 1 inch gage length
P/N: N/A - 50 mm gage length
P/N: N/A - 25 mm gage length